Series PZ ball bearing with waterproof seal, Wheels up to 1.300kg

Back to Drive wheels for maritime and offshore

Technical Specifications
- Wheel: injection-moulded heavy duty nylon polyamide 6 in natural white.
- Bearing: double shielded ball bearings lubricated with durable grease.
- Extra 3-part protection protects the ball bearing against moisture, dirt and dust.
- Temperature range: -30°C to +80°C.

Characteristics
These solid wheels are shock- and abrasion resistant, hygienic and wear resistant and under normal operating conditions maintenance free. A wheel with high load capacity and fine rolling characteristics at heavy loads. At operating temperatures higher than + 40° C the indicated load capacities will decrease.

Applications
For general purposes, where no rust is permitted, on smooth clean floors in the heavier segment the most applied wheel without tread, where no high requirements are made to rolling comfort, however low rolling resistance is desired.

Compare product

Series PZ ball bearing with waterproof seal, Wheels up to 1.300kg

Product variants

									Article number

80	35	15	40	48	35	18	41,5	300	18002-A
100	37	15	40	56	35	18	41,5	450	18005-A
100	37	20	40	56	42	16	51,5	450	18006-A
125	45	15	50	58	35	21	51,5	700	18008-A
125	45	20	50	58	42	21	51,5	700	18009-A
150	48	20	60	70	47	26	61,5	900	18011-A
150	48	25	60	70	52	27	61,5	900	18012-A
200	50	20	60	78	47	26	61,5	1200	18017-A
200	50	25	60	78	52	27	61,5	1200	18018-A
250	60	25	60	82	52	27	61,5	1400	4009-A
Looking for a custom wheel solution?									Request a personal wheel advice »